Weave geometry

Weft and warp yarns of a plain weave, built from the crossing at each vertex.

Weft, warp and wup yarns of a volumetric plain weave, built from the crossing matrix of each vertex.

Weave
Configuration at the origin
Family
Configuration at the origin
Handedness of the yarns
Section perpendicular to
Lines from axis to centerline
View
Save to file

Drag to orbit, scroll to zoom, right-drag to pan, F to fit. The red dot is the origin (0, 0, 0) when “Red origin dot” is on; the arrows beside it point along x, y and z. weft along x, warp along y. Each yarn is t ei ± acos(2πt/λ) ez: it passes every vertex a above or below the plane, the weft at a c and the warp at −a c, where c = ±1 alternates from vertex to vertex like a checkerboard. “Weft over” sets c = 1 at the origin, “Warp over” c = −1. Lengths are in units of the wavelength λ; the vertex spacing is λ/2. Lines from axis to centerline join each yarn's lattice line to its centerline every λ/32; in the plane weave they all run along z, in the yarn's own plane. Half a cell along a direction is a single line of vertices, cut λ/4 either side of it, so the yarns along that direction are λ/2 long.

Drag to orbit, scroll to zoom, right-drag to pan, F to fit. The red dot is the origin (0, 0, 0) when “Red origin dot” is on; the arrows beside it point along x, y and z. weft along x, warp along y, wup along z. Each yarn is t ei + Acos(2πt/λ+Φij) ej + Acos(2πt/λ+Φij') ej', with AcosΦ = a c at its vertex. A = a is the in-phase family, A = √2 a the helical one; in between the yarns are elliptical helices. Yellow markers are interlacings whose over/under is the opposite of the prescribed one; for the helical family the first ones appear at a = √2 λ/16 ≈ 0.088 λ. Lengths are in units of the wavelength λ; the vertex spacing is λ/2. Lines from axis to centerline join each yarn's lattice line to its centerline every λ/32: for the in-phase family they stay in one plane, for the helical one they turn about the axis. Half a cell along a direction is a single layer of vertices, cut λ/4 either side of it, so the yarns along that direction are λ/2 long.